| |
V812xS |
V812xSD |
| Power supply |
Rated voltage |
100-240V AC |
24V DC |
| Permissible range of voltage |
100-240V AC±10% |
24V DC±10% |
| Permissible momentary power failure |
Within 20ms |
Within 1ms |
| Demand (maximum rating) |
70VA or less |
30W or less |
| Inrush current |
20A, 10ms (100V AC) |
20A, 2ms |
| 40A, 10ms (200V AC) |
| Insulation resistance |
|
500V DC, 10MΩ or more |
| Physical environment |
Operation ambient temperature |
0°C – +50°C |
| Storage ambient temperature |
-10°C – +60°C |
| Operation ambient humidity |
85%RH or less (without dew condensation, Max. wet bulb temperature: 39°C or lower) *1 |
| Resistance to solvent |
No attachment of cutting oil or organic solvent |
| Atmosphere |
Not exposed to corrosive gas or conductive dust |
| Operation altitude |
2,000 meter or lower |
| Contamination level *2 |
Level 2 |
| Mechanical |
Resistance to oscillation |
Vibration frequency: 10–150Hz, acceleration: 9.8m/s2(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way |
| Resistance to shock |
Pulse shape: half-sine, peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, six times each way |
| Electric |
Noise proof |
1500Vp-p (pulse width 1 s, pulse rise time : 1ns) |
| Static discharge |
Complies with IEC61000-4-2, contact: 6kV, air: 8kV |
| Installation conditions |
Grounding |
Grounding resistance : Less than 100 Ω, FG/SG separation |
| Structure |
Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.)
Rear cover: Compatible with IP20
Form: Single unit
Installation method: Panel mounting |
| Cooling system |
Natural air cooling |
| Weight |
Approx.2.9kg |
| Dimensions W×H×D(mm) |
326.4×259.6×69.0 |
| Panel cutout (mm) |
313.0×246.2 (+0.5/-0) |
| Case color |
|
Gray |
| Material |
|
PC/ABS |
|
| Display specifications |
Screen memory |
12.5MB |
| Display device |
TFT color LCD |
| Resolution W:H(dots) |
800×600 |
| Display size |
12.1 inches |
| Colors |
65,536 colors (without blinks)/ 32,768 colors (with blinks) |
| Backlight |
CCFL |
| Backlight Auto OFF |
Lit in normal (Set by the user) |
| Power lamp |
Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs |
| Contrast adjustment |
Fixed |
| Brilliance control |
3 levels (Adjusted to 128 steps by macro command) |
| Number of characters |
1/4 size |
100 columns × 75 lines |
| 1-byte |
100 columns × 37 lines |
| 2-byte |
50 columns × 37 lines |
| Enlargement of characters |
|
X: 1–8 times Y: 1–8 times |
| Touch switch |
Switch resolution |
Analog: 1,024×1,024
Matrix: 50×30 |
| Mechanical life |
1 million times or more |
| Surface treatment |
Hard coating, Non glare finish 5% |
| Function switch |
Number of function switches |
8 switches |
| External interface |
D-Sub 9 pin (CN1) |
RS-232C, RS-422/485, Asynchronous type,
Data length : 7,8 bits,
Parity : even, odd, none, Stop bit : 1,2 bits,
Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *3bps
|
| Modular 8 pin (MJ1/ MJ2) |
RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits,
Parity : even, odd, none, Stop bit : 1,2 bits,
Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200bps
|
| CF card interface |
Compatible with CompactFlashTM |
| Ethernet |
Complies with IEEE802.3
Baud rate: 10Mbps, 100Mbps Cable: 100Ω
Unsealed twist pair, Category 5, Max length: 100m |
| USB |
Type A, Type B (Ver1.1) |
| Clock & Back up memory |
Battery |
Coin-type lithium primary battery |
| Back up memory |
SRAM 512KB |
| Back up period |
5 years (Ambient temperature 25°C) |
| Calendar accuracy |
Gap±90 sec. per month (Ambient temperature 25°C) |
|
